-40%
1997-2006 DBC LS1 STANDALONE WIRING HARNESS With 4L60e Transmission
€ 238.69
- Description
- Size Guide
Description
Call our Experts! 1-888-467-44911997-2006 DBC LS1 Standalone Harness with 4L60e Transmission
1997-2006 DBC LS1 Standalone Harness with 4L60e Transmission
Application
1998-2002 Camaro/Firebird, 1997-2004 Corvette (DBC ONLY), 2004 GTO, 2003-2006 CTSV.
Description
Our LS1 standalone harnesses are designed for installing these new GM EFI engines into your ride, whatever it may be. This swap harness is specific for 1997-2006 5.7 engines with RPO Code LS1 and LS6 with a
Drive by Cable (Mechanical) Throttle Body and EV1 Injectors and a 4L60e Transmission
.
On 2003 and newer applications leave a note with your year so we can install green retainers on the harness.
This harness is built for the 5 wire LS1/LS6 Mass Air Flow, and the 2 Wire coolant temperature sensor that is on all 1999 and newer LS Engines. 1997-1998 engine applications will need the 1999 and newer sensor and the 1999 and newer PCM listed in the additional info section below.
Why BP Automotive?
All of our standalone harnesses are made with GM color coded TXL wire to meet or exceed OEM standards! All circuits that are ran by heat like the O2 sensor circuits are covered with 1200* Fiberglass Braid. We only use OEM Delphi, Kostal, Bosch, Molex, and Yazaki connectors, terminals, and seals on our standalone harnesses. All connectors that have Connector Position Assurance Lock on a factory harness have them on our harnesses also. Our harnesses also include a sliding, snug fitting Delphi Grommet that can be positioned on the main harness line to seal your firewall.
Our LS swap standalone harnesses are 5 foot long from the rear of the intake. This enables you to mount the PCM and Fuse Block in the passenger compartment! This harness is for pre-emissions vehicles or for off road use only. This harness does not have provisions for EGR, AIR, EVAP, or Rear O2 Sensors. We can add these for an additional cost, however in most cases they are not needed. IF EMISSIONS ARE NEEDED YOUR HARNESS WILL INCUR A LEAD TIME.
Additional Info
Our LS swap harnesses also require the removal of the VATS and emissions systems from the PCM. BP Automotive offers this service with a discount when purchasing a new harness. This harness also requires the use of a Red and Blue PCM service numbers 12200411 or 9354896, which can be purchased from BP Automotive. This application uses an Electronic Automatic Transmission applications which will also require a double pole brake switch for converter lock up control. This can also be purchased from BP Automotive, P/N TCC-001.
Shipping
Shipping cost:
Free
Shipping Cutoff:
Any listing shipped via USPS will usually ship the following day if ordered after 12pm Central Time. Any listing shipped via UPS will usually ship the same day if ordered before 2pm central time. Our shipping cut off time is set to 12pm Central Time, if you need your item to ship the same day please place your order before 12pm the cut off time to ensure same day shipping!
Payment
We accept the following payment methods:
PayPal
Please contact us if you have any questions.
Support
We offer tech support via our phone Monday-Friday 8am to 3pm Central Time. 1-888-467-4491