Jeep Fuel Injection Kit for 4.2L 258 CI Complete TBI Fuel EFI Conversion Kit

Description

PERFORMANCE FUEL INJECTION SYSTEMS TBI KIT
CONTACT US WITH QUESTIONS OR OTHER APPLICATIONS
517 975 FOUR SEVEN SEVEN ZERO
PHONE 517 975 4770 WITH QUESTIONS OR OTHER APPLICATIONS
PLEASE
!!! YOU WILL GET A
EMAIL/NOTE
ASKING ABOUT YOUR ENGINE AND VEHICLE THAT IT IS GOING ON. I NEED THIS TO PROCESS YOUR ORDER "
PLEASE
" LOOK FOR THE
EMAIL/NOTE
AFTER YOU BUY
Performance Fuel Injection Systems
EFI Conversion Kit
C
omplete Stand Alone Fuel Injection System Kit
*
This is a complete fuel injection system kit. Upgrade your carburated 4.2L  258 CI  Jeep to a Fuel Injection kit from Performance Fuel Injection Systems. Fuel injection is becoming a very popular upgrade or TBI conversion to any carburated vehicle, get that new car starting with Fuel Injection from Performance Fuel Injection Systems. Not only do you get excellent cold start ups but increase your fuel mileage and the performance of that Jeep that you love to drive. Whether it is a daily driver or the TOY you drive on the weekend get that feeling that a turn of the key and its running. No more pulling the choke pumping the gas pedal to start. Fuel injection conversion is a good choice for any carburated vehicle.
* Stand alone means that the system only needs 12 volt ignition and 12 volt battery feed to make the system run. We only use the 5 sensors so this is a very simple system, and the best of all the fuel injection system installed on your vehicle runs completely closed loop once warmed up (14.7 air fuel ratio) just like the new vehicles, but with fewer sensors than a new car. This TBI system is based off the reliable 1987 to 1995 Chevy PU with Throttle Body Injection (TBI) this was a proven great system for years and there were and still are thousands of these vehicles out there. Not only that but all the parts used in our Fuel Injection System Kit from Performance Fuel Injection Systems are off the shelf parts available at any Auto Parts Store NAPA, Auto Zone, Advanced Auto, O'Rileys,  Pep Boys etc. The TBI and the ECM are remanufactured the rest of the parts NEW Fuel pump New converted Large cap GM HEI distributor where we take the 4 pin ingition module and swap it out for a 7 pin so that the computer (ECM) crontrols the spark.  W
E ARE ONE OF THE VERY FEW FUEL INJECTION COMPANIES THAT HAVE FUEL AND SPARK CONTROL AS STANDARD ON OUR KITS NOT A OPTION DO YOUR HOMEWORK
The adaptor plate is a custom CNC machined for the 2 BBL manifold as you can see in the picture, The other picture shows the 4BBL plate that is pocketed to draw off all 4 holes (barrels) on your intake manifold, IF EQUIPPED WITH 4BBL MANIFOLD. If you need a adaptor plate for a different manifold, or some other configuration please drop us a line or email. Sensors are NEW. The wiring harness is all made with TXL wire which is water oil and grease resistance, and all in convoluted loom (split loom) which makes for a good looking system when you open the hood. Comes With Complete Instructions for installation.
CHECK OUT OUR OTHER AUCTIONS FOR OTHER FUEL INJECTION KITS FOR OTHER APPLICATIONS OR GIVE US A CALL 517-975-4770
REMEMBER FREE SHIPPING
THIS KIT IS FOR A STOCK 258 CI 4.2L JEEP ENGINE
Complete Fuel Injection System for Stock 258 CI 4.2L JEEP
Fuel Injection System Includes:
TBI -
Rebuilt 1.750 TBI fuel injection
Wiring Harness
Check engine light
Fuel pump w/fuel filter and mounting strap
Fuel Pump block off plate
2BBL CNC Machined for Jeep 2BBL manifold
OR Adapter plate -
Precision machined aluminum pocket plate 4BBL
For other manifolds contact us
Fuel tubes
Installation instructions
Heated O2 Sensor
Map Sensor
IAC Sensor (Idle air control motor) New on TBI
TPS Sensor
Coolant Temperature Sensor
Necessary hardware and gaskets to mount system to intake manifold
(Please specify what brand Manifold you have)
Fuse link
Air cleaner stud
NEW Large cap distributor converted to a 7 pin Ingition module for complete spark control
ECM (maybe re-manufactured) with custom calibrated EPROM chip (installed in ECM)
Parts not included are:
FUEL LINES
AIR CLEANER
Warranty:
90 days for ECM and distributor
1 year on the rest of the system components
Contact seller for other applications.